Frequently asked questions
This entry in our frequently asked questions is directed to advanced users, everything you do is at your own risk and responsibility.
Note! If you change your PHP configuration, things may stop working, either immediately or later. See here for more info about the PHP versions and the webservers.
Our webservers' standard PHP configuration is good enough for the majority of applications. If you know you need different config settings, you may customize the configuration at your own risk. Such customization may be:
- Settings for error display, timezone, etc.
- Resource limits, e.g. memory (memory_limit, post_max_size, upload_max_filesize), runtime (max_execution_time, max_input_time) etc. MAY NOT be INCREASED or EXCEEDED.
As opposed to
mod_php based solutions, you
cannot customize PHP config settings directly in
If you try to do so, you will get "internal server error".
If you customize settings as those mentioned above, and you get errors or malfunctions in your software, double-check that you have not typoed or made other mistakes in your customizations. If you cannot make it work at all, leave it to an expert, or revert to our standard configuration. We cannot provide support for such customization.
If you increase or exceed resource limits (which is not permitted), we may have to deactivate the PHP code in question and/or the configuration file. If your resource needs are greater than which we can provide, you should use a dedicated server or virtual private server.
PHP is configured at several levels
- Runtime level (in the PHP script, PHP_INI_USER, PHP_INI_ALL,
- Directory level (you decide, PHP_INI_PERDIR, use
- System level (central configuration, we decide, "Master value",
PHP_INI_SYSTEM and our
- Hardcoded level (PHP compilation/installation, we do not change anything from Debian's defaults)
PHP's web pages have an overview over available settings.
Configuration of the PHP_INI_USER and PHP_INI_ALL types can be set in each script (or an include file), regardless of the installed PHP version.
Most requests for system level changes to variables are unnecessary,
the PHP developer/maintainer may set these in the program/script by using
and it's very easy to check and confirm settings with
Example ini_set() usage
<?php ini_set("display_errors",1); print(ini_get("date.timezone")."\n"); ini_set("date.timezone","Europe/Berlin"); print(ini_get("date.timezone")."\n"); ?>
If you need to configure the timezone, replace Europe/Berlin with the timezone you require. Standard for our PHP is "Europe/Oslo", so you may wish to change that.
Some settings cannot be performed in a program/script. If you create
.user.ini in the www folder,
you only need to specify your customizations, as opposed to in
php.ini, where you also must
specify those you don't customize.
display_errors = On date.timezone = "Asia/Jakarta"
If you need to configure the timezone, replace Asia/Jakarta with the timezone you want to use. See also PHP's supported timezone list.
Because our PHP installation is using uWSGI, you have the option of creating your own
php.ini, and therefore also changing settings of the types PHP_INI_SYSTEM and
php.ini. Copy and use our standard
It may take up to thirty (30) minutes for changes to
php.ini to take effect.
Do not create your own
php.ini from scratch,
unless you include all our preconfigured variables!
Here is how to create your own
- Download and copy our standard
php.inito your webhotel, e.g.
/home/2/m/myname/php.ini. It is not recommended to leave this file readable by others. Do not create your own
- Customize the file according to your needs.
- Changes to
php.iniare not active immediately, but after respectively 5 and 30 minutes.
- Support for IonCube Loader may be activated via the webhotel's control panel. This will deactivate the option of using your own
php.ini. This is an advantage to using your own
php.iniand downloading your own loader/extension.
- Pay attention to changes we make in our
To verify that your customizations have been loaded, check the
configuration settings with
phpinfo(), where the value "Loaded Configuration File" will display the name of the configuration file that was loaded. If it displays e.g. "/etc/php/7.3/embed/php.ini", your setting was not successful. Check your
php.ini, and try again.
If you get an "internal server error" message, you've probably made a mistake, such as trying a setting that's invalid, using the wrong file permissions (PHP-scripts on our webservers must not be writeable for others), etc.
Extensions, modules, and plugins
Many extensions can be installed in your own webhotel and loaded by a
php.ini. They cannot be loaded
We do not provide support for such extensions, even if a very nice support person helped you install it the first time.
Several such extensions are so-called PHP accelerators or "optimizers", which essentially offer you the following two services:
- Theoretical performance improvements
- Obfuscated/encrypted source code
The theoretical performance improvements will often backfire as lost performance, because the accelerators assume that PHP is running as integrated, optimizable code (
mod_php) in the webserver itself. Our webservers run PHP as CGI under uWSGI for added security, which means that your main interest will probably be in obfuscation/encryption.
Some PHP software require e.g. IonCube, your software vendor will provide you with the information necessary for deciding what to use. We do not provide support for such extensions.
The examples below are provided for your convenience only, and you may use them as examples on how to load extensions in general, at your own risk and responsibility.
NOTE: We do not provide support for IonCube.
Users of PHP do not need their own
php.ini. Instead, we recommend that you select IonCube in our control panel, click on "View/change" next to "PHP". The change may take 10-30 minutes.
You cannot have your own
php.ini with this option. This is a simplification in, so that you won't have to figure out how to load IonCube via
If you have an extension
from IonCube, make
sure that you use the version for Linux (x86-64) and your webhotel's
PHP version. You can load it by adding a separate line in
php.ini. We do not provide support for IonCube.
Use the Linux (x86-64) version. The x86 version may also work.
Zend Optimizer/Zend Guard Loader
Zend Guard Loader for PHP 5.6
NOTE: We do not provide support for Zend Guard. Zend Guard does not exist for PHP 7.x, and therefore no longer provide installation.
If you experience problems with Zend Guard, contact your software vendor's support service for upgrade to a version supporting PHP 7.3.
PECL/PEAR extensions (e.g. Imagick
Imagick and many other extensions are pre-installed and active.
To get a list of our installed and activated PECL/PEAR extensions, either
phpinfo() or login
login.domeneshop.no and enter the command
pecl l and/or
You are free to install further PECL extensions to your own webhotel, but not to our central servers. This is at your own risk. We do not provide support for this.
If you need to add/activate additional extensions, PHP permits the
use of the module's complete path in
php.ini. This allows
the use of both modules installed by us, and those you choose to
install yourself. As an example, you can use:
This is also at your own risk and responsibility.